Tags:
Do the whole positive experience and all with rewarding and praise but you could also try using a dremel. Some dogs just don't like the sudden pinching or snap feeling by their toes. To get them used to the sound turn it on daily for a small time and break out those treats. After a while of not caring about the sound then you could move in and hold the dogs paw close to the dremel. Do that daily until no bad reactions. After you get to that point you should be able to grind. Most dogs do better with grinding than clipping. Just make sure you have constant pressure and use a rocking motion. Don't let the tool bounce on the nail, it scares them and chips your sander. Use a high grit sand paper on your bit, it will feel most comfortable. Dremel to purchase: http://www.dremel.com/en-us/Tools/Pages/ToolDetail.aspx?pid=7300
Use low speed setting.
For those of you trying to shorten the quick the dremel is the only way to do this without quicking your dog. Please only attempt when you have septic powder on hand (just in case), and have complete confidence and control in what you are doing. Once you see the pink (white nails) or dark squishy black (black nails), you can then very carefully grind the nail away from the quick just around the very tip. The quick part you expose will then move back in the nail slowly. You should do this about every two weeks to shorten the quick until you reach the desired length. This should not be painful for your dog or make them bleed if done properly. Then keep up with the nails about every four weeks.
© 2024 Created by Sam Tsang. Powered by